Optoma ZX210ST Manual do Utilizador Página 1

FOCUS®Data ProjectorUser's Manual

10EnglishIntroductionConnectors View1. SD Card Slot2. RS-232 Connector (3-pin DIN Type)3. Composite Video Input Connector4. S-Video Input Connecto

100EnglishAppendices No image appears on-screen ► Ensure all the cables and power connections are correctly and securely connected as described in the

101EnglishAppendices 4. Verify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 × 1200).  If you are using a

102EnglishAppendices Image is out of focus ► Make sure the lens cap is removed. ► Adjust the Focus Ring on the projector lens. ► Make sure the projec

103EnglishAppendices ► If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power. If the

104EnglishAppendices On Screen Messages  No source found  Logo capture failed:  File not supported No audio output during Network Display mode. N

105EnglishAppendicesFor widescreen resolution (WXGA), the compatibility support is dependent on Notebook/PC models.120Hz input signals may be depe

106EnglishAppendicesVideo CompatibilityComputer CompatibilityMode Resolution V-Sync (Hz) H-Sync (KHz)MAC LC 13” 640 × 480 66.66 34.98MAC II 13” 640 ×

107EnglishAppendicesSupported Multimedia FormatVideo File FormatVideo FormatDecode Max ResolutionProel LevelAVI,MOV,3GP,MP4 H.263 1920x1080 30fps P

108EnglishAppendicesRS232 Pin AssignmentsPin no.Spec. (from projector side)1 TXD2 RXD3 GNDRS232 Commands and Protocol Function List31 2RS232 shell

109EnglishAppendicesRS232 Protocol Function ListBaud Rate : 9600Data Bits: 8Parity: NoneStop Bits: 1 Flow Control : NoneUART16550 FIFO: DisableProject

11EnglishIntroductionControl Panel3 4286107159Using the Control Panel1 Light LEDIndicate the projector light status.2 Temp LEDIndicate the projector t

110EnglishAppendices----------------------------------------------------------------------------------------------------------------------------------

111EnglishAppendices----------------------------------------------------------------------------------------------------------------------------------

112EnglishAppendices----------------------------------------------------------------------------------------------------------------------------------

113EnglishAppendicesPlease note that damage resulting from incorrect installation will void the warranty.Ceiling Mount Installation1. Place the pro

114EnglishAppendicesOptoma Global OfcesFor service or support please contact your local ofce.USA3178 Laurelview Ct. Fremont, CA 94538, USA 888-2

115EnglishAppendicesLatin America715 Sycamore Drive 408-383-3700Milpitas, CA 95035, USA 408-383-3702www.optoma.com.br www.optoma.com.mx KoreaW

116EnglishAppendicesRegulation & Safety NoticesThis appendix lists the general notices of your projector. FCC notice This device has been tested a

117EnglishAppendicesClass 1 Laser ProductCLASS 1 LASER PRODUCTComplies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice

118EnglishAppendicesDisposal instructionsDo not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost p

12EnglishIntroductionRemote ControlPower SwitchSourceLRe-SyncRKeystone VolumeMode-+-+Brightness1Menu2Zoom3HDMI4Freeze5AV mute6S-Video7VGA8Video9Contra

13EnglishIntroduction5Mode or Laser (Button varies on model)With Laser version: Press to use the laser pointer.Without Laser version: Press Mode to ch

14EnglishConnecting the ProjectorConnect to Computer/NotebookDue to the difference in applications for each country, some regions may have different

15EnglishConnecting the ProjectorConnect to Memory DriveSD CardRS232C VIDEO S-VIDEOVGA-IN/YPbPrVGA-OUTRJ-45HDMIUSB / DISPLAYAUDIO-OUTAUDIO-INMOUSE/SER

16EnglishConnecting the ProjectorConnect to Network(*) Optional accessory PICTURE BYSD CardRS232C VIDEO S-VIDEOVGA-IN/YPbPrVGA-OUTRJ-45HDMIUSB / DIS

17EnglishConnecting the ProjectorConnect to Video SourcesComposite Video OutputS-Video OutputDue to the difference in applications for each country,

18EnglishUsing the ProjectorPowering the projector On / OffIf the projector does not automatically search for source, press on the control panel o

19EnglishUsing the ProjectorContact the nearest service center if the projector displays these symptoms. See pages 68-69 for more information.Warnin

2EnglishIMAGE ...28IMAGE | Advanced ...30DISPLAY ...32D

20EnglishUsing the ProjectorAdjusting the Projected ImageAdjusting the Projector’s Height Tilt-Adjustment FeetTilt-Adjustment RingThe projector is equ

21EnglishUsing the ProjectorAdjusting the Projector’s FocusTo focus the image, rotate the focus ring until the image is clear.  XGA series: The pro

22EnglishUsing the Projector This table is for user’s reference only.XGA This table is for user’s reference only.WXGADiagonal length (inch) size of

23EnglishUsing the ProjectorProjecting ImageWhen the projector is turned on, it automatically searches for connected devices. Once a device is detecte

24EnglishAdjusting the SettingsThe Projector has a multilingual On-screen Display menu that allows you to make image adjustments and change your proje

25EnglishAdjusting the SettingsMenu TreeMain Menu Sub Menu SettingsImageDisplay ModePresentation / Bright / Movie / sRGB / Blackboard / Classroom / Us

26EnglishAdjusting the SettingsMain Menu Sub Menu SettingsSetupLanguageEnglish / Deutsch / Français / Italiano / Español / Português / Svenska / Neder

27EnglishAdjusting the SettingsPlease note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model

28EnglishAdjusting the SettingsIMAGE Display Mode The projector comes with factory presets designed for various types of images. Select an appropria

29EnglishAdjusting the Settings“Saturation” and “Tint” func-tions are only supported under Video mode. Brightness Adjust the brightness of the imag

3English Optoma Presentation Software ... 68Downloading the Software ...68Login ...70How to Projec

30EnglishAdjusting the SettingsIMAGE | Advanced Gamma This allows you to choose a gamma table that has been ne-tuned to bring out the best image qu

31EnglishAdjusting the Settings ► Reset: Choose to return the factory default settings for color adjustments. Color Space Select an appropriate c

32EnglishAdjusting the SettingsDISPLAY Format Use this function to choose your desired aspect ratio.XGA ► 4:3: This format is for 4×3 input sources.

33EnglishAdjusting the Settingswidescreen laptops. ► LBX: This format is for non-16x9, letterbox source and for users who use external 16x9 lens to d

34EnglishAdjusting the Settings Zoom ► Press the to reduce the size of an image. ► Press the to magnify an image on the projection screen. H

35EnglishAdjusting the Settings 3D Use this function to enable 3D display. ► Off: Disable 3D display. ► DLP-Link: Enables 3D display in DLP mode. ►

36EnglishAdjusting the SettingsSETUP LanguageChoose the OSD menu language. Press or to enter the sub menu and then press or to select your pre

37EnglishAdjusting the Settings When selected, the image will turn upside down. ► Rear-Ceiling When selected, the image will appear reversed in

38EnglishAdjusting the Settings LogoUse this function to set the desired startup screen. If changes are made, the setting takes effect the next time t

39EnglishAdjusting the SettingsSETUP | Signal Automatic Automatically selects the signal. If you use this function, Phase and the frequency items are

4EnglishUsage NoticeSafety InformationThe lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence

40EnglishAdjusting the SettingsSETUP | Security Security ► On: Choose “On” to prompt for security verication when the projector is turned on. ► Off:

41EnglishAdjusting the Settings1. Use the number buttons on the remote control to enter the current password, and then press Enter.2. Enter the des

42EnglishAdjusting the SettingsSETUP | Network Network StateDisplay the network connection status. When connected, you can access and control the pr

43EnglishAdjusting the Settings DNSIf DHCP is “Off”, enter a DNS number. Press or to move between elds and press or to adjust the value. Appl

44EnglishAdjusting the Settings Source Lock ► On: The projector is locked to the current source. When the projector is turned on, the projector will

45EnglishAdjusting the Settingswhen no signal is available. Test PatternUse this function to run a test pattern. ► None: Disable test pattern. ► Grid

46EnglishAdjusting the SettingsOPTIONS | Advanced Direct Power OnChoose “On” to activate Direct Power mode. The projector automatically turns on onc

47EnglishMemory Drive DisplayMultimedia Menu The projector displays les saved in memory devices such as SD cards and USB ash drives. When the proj

48EnglishMemory Drive Display1. Press or to highlight Video on the multimedia home menu.2. Press on the control panel or Enter on the remo

49EnglishMemory Drive Display6. If the selected le is unnished from a previous playback, the screen below appears. Otherwise, skip to step 7.Play f

5EnglishUsage NoticePrecautions Please follow all warnings, precautions and maintenance as recommended in this user’s guide.▀ Warning- Do not look i

50EnglishMemory Drive Display1. Press or to highlight Music on the multimedia home menu.2. Press on the control panel or Enter on the remo

51EnglishMemory Drive Display6. The Music Playback screen appears. Press or to highlight the icons on the playback control and press on the c

52EnglishMemory Drive DisplayHow to play a slideshow1. Press or to highlight Photo on the multimedia home menu.2. Press on the control pan

53EnglishMemory Drive Display5. Press on the control panel or Enter on the remote control to start slideshow.6. The Slideshow screen appears. Slid

54EnglishMemory Drive DisplayHow to view documents The projector supports viewing of Word documents (*.doc) and PDF les saved in a memory device.1.

55EnglishMemory Drive Display5. Press on the control panel or Enter on the remote control to open the le.6. The Ofce Viewer screen appears. Repo

56EnglishMemory Drive DisplayMultimedia Setup Menu Use the Multimedia Setup menu to adjust the multimedia settings.1. Press or to highlight

57EnglishMemory Drive DisplayMultimedia Setup Menu TreeSetup Menu Sub Menu SettingsVideo SettingRepeatRepeat All / Repeat One / Repeat OffBrowsing Typ

58EnglishMemory Drive Display Repeat Use this function to enable continuous video playback. ► : Repeat all video les. ► : Repeat one video le. ►

59EnglishMemory Drive Display Repeat Use this function to enable continuous music playback. ► : Repeat all music les. ► : Repeat one music le. ►

6EnglishUsage NoticeDo:  Turn off and unplug the power plug from the AC outlet before cleaning the product.  Use a soft dry cloth with mild dete

60EnglishMemory Drive Display Timer Use this function to set the slideshow interval. ► : 2-second interval between slides. ► : 5-second interval b

61EnglishMemory Drive Display Displays the projector model name, software version, and the memory device information.Information

62EnglishUSB Display When the projector detects that a computer is connected through the mini USB port, the projector enters USB display mode and dis

63EnglishUSB DisplayMinimum System RequirementsSystem Requirements ► CPU: Intel Dual Core 1.4GHz or better ► Memory: 1GB of RAM ► Disk: 10MB of free

64EnglishNetwork DisplayFor Windows SystemsFeatures1. Support Driverless Screen Capture2. Support Screen Monitoring feature3. Support Windows XP, V

65EnglishNetwork DisplayFor MAC-OS SystemsFeatures1. Support Screen Mirroring2. Support MAC OS 10.5, 10.6, 10.73. Support Audio Projection (Option

66EnglishNetwork DisplayNetwork Display modeThe IP address generated by the projector varies depending on your local area network connection settin

67EnglishNetwork DisplayOpen Optoma Web Utility1. Connect your computer to the same network where the projector is connected.2. Launch your web brow

68EnglishNetwork DisplayOptoma Presentation SoftwareThe Optoma Presentation Software (OPS) supports remote projection from up to four computers simult

69EnglishNetwork Display4. The following message may appear, click Run to continue.5. Click Next to continue.6. Follow the on-screen instructions t

7EnglishUsage NoticeProduct Features▀ XGA (1024x768) Native resolution / WXGA (1280x800) Native resolution ▀ HD compatible – 1080p supported ▀ V

70EnglishNetwork DisplayLogin1. On your computer, click Start > Programs > Optoma > OPS. Or, double-click the OPS icon on your desktop to la

71EnglishNetwork DisplayHow to Project Image?5123846 7Using OPS1 Login CodeDisplays the login code.2 MenuClick to display the application menu.3 Minim

72EnglishNetwork DisplayOn using the 4-to-1 split screen projection: Support Windows XP/Vista/7 and MacBook OS 10.5 and above. While using the 4-t

73EnglishNetwork DisplayUsing the OPS MenuClick to display the application menu. ► Show Login Code: Click to display the login code of the projecto

74EnglishNetwork Display ► Auto Power Manager: Check to allow the projector to change your computer power scheme to the "highest performance"

75EnglishNetwork DisplayUsing Remote DesktopWhen the projector and the computer are connected through OPS, plug a standard USB keyboard or USB mouse i

76EnglishNetwork DisplayWeb Utility: Conference ControlThe Conference Control function allows you to control how you want to project images from up to

77EnglishNetwork DisplayThe Conference Control screen appears.1 23Using Conference Control1 Computer NameLists the network computers connected through

78EnglishNetwork DisplayWeb Utility: Admin SettingsUse the Admin function of the Optoma Web Utility to remotely view and modify the projector settings

79EnglishNetwork DisplayThe Network Setup screen displays and allows you to change the network settings of the projector, such as the IP Setup, DHCP S

8EnglishIntroductionDocumentation : User’s ManualWarranty CardQuick Start CardWEEE Card (for EMEA only)Due to different applications in ea

80EnglishNetwork DisplayUse the Change Passwords screen to change the login password for Conference Control and Admin access. Only one type of passwor

81EnglishNetwork DisplayUse the Projector Control Panel screen to remotely modify the projector settings, such as Brightness, Keystone, Display Mode,

82EnglishNetwork DisplayUse the Alert Setting screen to congure the projector to send out email alerts when errors occur, such as fan failure, high t

83EnglishNetwork DisplayUse the Reset to Default screen to restore the network settings to its default factory settings. Click Apply to proceed with t

84EnglishNetwork DisplayCrestron RoomViewCrestron RoomView works as a remote control station of your projector when connected over a network. Crestron

85EnglishNetwork Display4MenuToolsClick to customize the projector settings.InfoClick to view the projector information.HelpClick to view help.5 Volum

86EnglishNetwork DisplaySmart Phone DisplayYou can project multimedia les, documents and presentations from your iPhone or Android phones.Use MobiSho

87EnglishNetwork Display5. When the Login screen appears, type the login code from the Network Display screen of your projector. Then, click Login.6.

88EnglishNetwork Displayor or8. Touch the playback buttons to control or adjust the projection options.Displayed playback control buttons vary depe

89EnglishNetwork Display1. Turn on WiFi on your phone.2. Connect your phone to the Internet.3. Open Market and search for “mobishow”.4. Follow the

9EnglishIntroductionProduct Overview1. Control Panel2. IR Receiver3. Focus Ring4. Lens5. IR Receiver6. Tilt-Adjustment Feet7. Speaker8. Ventilati

90EnglishNetwork Display6. Touch one of the following le buttons: ► Media: To play video/audio les. ► Photo: To dislay photo les. ► PtG: To displa

91EnglishNetwork Displayoror8. Touch the playback buttons to control or adjust the projection options.Displayed playback control buttons vary depen

92EnglishNetwork DisplayPlatform iOS Android BlackberyClient Software MobiShow Lite MobiShow MobiShowSystem Requirements (HW)iPad/iPad2iPhone 3/4(s)iP

93EnglishNetwork DisplayWiFi DocWiFi-Doc allows your Android/iOS device to show the native ofce le to big screens (projectors, TVs, etc.) through Wi

94EnglishNetwork DisplayDownload WiFi Doc in iPhone1. Turn on WiFi on your phone.2. Connect your phone to the Internet.3. Open App Store and search

95EnglishNetwork Display5. When the Login screen appears, type the login code from the Network Display screen of your projector. Then, click Login.6.

96EnglishNetwork DisplayDownload WiFi Doc in Android1. Turn on WiFi on your phone.2. Connect your phone to the Internet.3. Open App Store and searc

97EnglishNetwork Displaythe Network Display screen of your projector. Then, click Login.6. Select the le you want to display.7. The le is displaye

98EnglishAppendicesPtG2 ConverterPtG2 Converter is a computer software that allows you to convert PowerPoint (*.ppt) les to PtG2 format playable on P

99EnglishNetwork DisplaySystem Requirements ► CPU: Pentium P4-M 1.5G and above ► Memory: 256M and above ► OS: Windows 2K SP4, Windows XP SP2 or SP3, W