Optoma W350 Manual do Utilizador descarregar pdf (Página 14)

English

Installation



Contact the

nearest service

center if the

projector displays

these symptoms.

See pages

71-72 for more

information.

Powering off the projector

1. Press the “ ” button on the remote control or on the

control panel to turn off the projector.

The following message will be displayed on the screen.

Press the “ ” button again to conrm otherwise the

message will disappear after 15 seconds. The projector will

shut down when the “ ” button is pressed for the second

time.

2. The fans will continue to operate for 10 seconds and the

POWER LED will ash blue. During this period, the projec-

tor cannot be turned back on and the projector should not

be unplugged.

Once the cooling cycle is complete, the POWER LED will

turn to solid red (standby mode). At this point, the projector

can be turned back on by pushing the “ ” button.

3. Disconnect the power cord from the electrical outlet and the

projector.

4. Do not turn on the projector immediately following a power

off procedure.

Warning Indicator

When the warning indicators (see below) come on, the

projector will automatically shutdown:

 “LAMP” LED indicator is lit red and if “On/Standby” indica-

tor ashes red.

 “TEMP” LED indicator is lit red and if “On/Standby”

indicator ashes red. This indicates the projector has

overheated. Under normal conditions, the projector can be

switched back on.

 “TEMP” LED indicator ashes red and if “On/Standby”

indicator ashes red.

Unplug the power cord from the projector, wait for 30 seconds

and try again. If the warning indicator light up again, please

contact your nearest service center for assistance.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 73 74

Comentários a estes Manuais

Sem comentários

Optoma W350 Manual do Utilizador Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com Projetores Optoma W350