Optoma W350 Manual do Utilizador descarregar pdf (Página 61)

English

Appendices

Lamp Replacement Procedure:

1. Switch off the power to the projector by pressing the “ ” button.

2. Allow the projector to cool down for at least 30 minutes.

3. Disconnect the power cord.

4. Unscrew the one screw on the cover. 1

5. Lift up and remove the cover. 2

Lift up the lamp handle. 3

7. Press on the both sides then lift up and remove the lamp cord. 4

8. Unscrew the one screw on the lamp module. 5

9. Lift up the lamp handle 6 and remove the lamp module slowly and carefully.

To replace the lamp module, reverse the previous steps.

10. Turn on the projector and reset the lamp timer.

Lamp Reset: (i) Press “Menu”  (ii) Select “OPTIONS”  (iii) Select

“Lamp Settings”



(iv) Select “Lamp Reset”



(v) Select “Yes”.

The screws on the

lamp cover and the

lamp cannot be

removed.

The projector

cannot be turned

on if the lamp

cover has not been

placed back on the

projector.

Do not touch the

glass area of the

lamp. Hand oil can

cause the lamp to

shatter. Use a dry

cloth to clean the

lamp module if it

was accidentally

touched.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 73 74

Sem comentários

Optoma W350 Manual do Utilizador Página 61